UPD系列超快光電探測器非常適合從DC-25GHz光波形探測。用戶可選型號有短至15ps上升時間，光譜范圍高達170-2600 nm。
所有光電探測器封裝在緊湊固體鋁外殼之內，可選電池或適配器供電。
UV-拓展版本硅超快光電探測器是市場上唯一商業化的光譜范圍覆蓋170-1100 nm的超快光電探測器。
另一類型UV-敏感InGaAs 超快光電探測器非常適合探測光譜范圍：350-1700 nm的脈沖激光器, 具有市場上最寬的光譜范圍、最快速響應。
完美的阻抗匹配和德國最先進微波技術保證了脈沖波形測試不受震動及紋波干擾。可自由使用50 Ω 接地電阻為最高速操作，或者一個高阻抗負載獲得更大信號。最大保障了這些探測器使用靈活性。
與我們BBA系列寬帶高增益放大器組合，超快速光電探測器有利于替代昂貴的雪崩光電二極管探測器。
UPD 系列超快光電探測器是激光、光子研究等領域不可或缺的工具。
新光電探測器模塊: 更快的上升時間 & 更寬的波長范圍
UPD-15-IR2-FC: 超快InGaAs PIN光電探測器, 上升時間<15 ps, 帶寬 >25GHz, 光譜范圍800-1700nm, 光纖耦合輸入，FC/APC連接器。
UPD-35-IR2-P, UPD-35-IR2-D: 超快InGaAs PIN光電探測器, 上升時間<35ps, 帶寬>10GHz, 光譜范圍800-1700nm, 拋光或擴散窗口
UPD-35-UVIR-P, UPD-35-UVIR-D: 超快InGaAs PIN光電探測器, 上升時間<35ps, 帶寬>10GHz,光譜范圍350-1700nm, 拋光或擴散窗口
UPD-50-SP, UPD-50-SD, UPD-50-UD, UPD-50-UP:超快Si PIN光電探測器, 上升/下降時間50ps, 帶寬>7GHz,光譜范圍170-1100nm , 320-1100nm, 拋光或擴散窗口
UPD-100-IR1-P:超快Ge光電探測器, 上升時間<100ps, 脈寬(FWHM)300ps, 光譜范圍400-2000nm
UPD-3N-IR2-P:快速InGaAs光電探測器, 拓展紅外波長范圍高達2.1 μm, 上升時間150ps
UPD-5N-IR2-P: 快速InGaAs光電探測器, 拓展紅外波長范圍高達2.6 μm, 上升時間200ps
產品可選系列：
|
Item |
Part Number | DESCRIPTION |
| Ultrafast Photodetectors: UPD Series | ||
| 1 | UPD-10-IR2-FR |
NEW! Ultrafast InGaAs Photodetector with fiber receptacle,
rise time typ. 10 ps, bandwidth > 32 GHz, spectral range: 900 … 1650 nm, fiber receptacle: FC/PC connector.
2.92 mm K-connector for electrical signal output. Universal power supply 100 … 230 V AC included.
|
| 2 | UPD-15-IR2-P |
NEW! Ultrafast InGaAs Photodetector,
rise time typ. 15 ps, bandwidth > 25 GHz, spectral range
800 … 1700 nm, for free-space beam, polished glass window, SMA connector for the RF output.
Needs +5 VDC supply.
|
| 3 | UPD-15-IR2-FC |
Ultrafast InGaAs Photodetector,
rise time typ. 15 ps, bandwidth > 25 GHz, spectral range 800 … 1700 nm, 1 m long SM fiber, with FC/APC, SMA
connector for the RF output. Not compatible with the optional filter holder.
Needs +5 VDC supply.
|
| 4 | UPD-15-UVIR-FC |
Ultrafast InGaAs Photodetector,
rise time typ. 15 ps, bandwidth > 25 GHz, spectral range 350 … 1700 nm, 1 m long SM fiber, with FC/APC, SMA connector for the RF output. Not compatible with the optional filter holder.
Needs +5 VDC supply.
|
| 5 | UPD-35-IR2-P |
Ultrafast InGaAs Photodetector, rise time typ. 35 ps, bandwidth > 10 GHz, spectral range 800 … 1700 nm,
polished glass window, SMA connector for the RF output. Needs +12 VDC supply or bias battery.
|
| 6 | UPD-35-IR2-D |
Ultrafast InGaAs Photodetector, rise time typ. 35 ps, bandwidth > 10 GHz, spectral range 800 … 1700 nm, crystal quartz diffuse window (recommended for high peak power lasers only), SMA connector for the RF output.
Needs +12 VDC supply or bias battery.
|
| 7 | UPD-35-UVIR-D |
Ultrafast InGaAs Photodetector, rise time typ. 35 ps, bandwidth > 10 GHz, spectral range 350 … 1700 nm, crystal quartz diffuse window (recommended for high peak power lasers only), SMA connector for the RF output.
Needs +12 VDC supply or bias battery.
|
| 8 | UPD-35-UVIR-P |
Ultrafast InGaAs Photodetector, rise time typ. 35 ps, bandwidth > 10 GHz, spectral range 350 … 1700 nm,
polished window MgF2, SMA connector for the RF output. Needs +12 VDC supply or bias battery.
|
| 9 | UPD-35-IR2-FR-S |
Ultrafast InGaAs Photodetector, rise time typ. 35 ps, bandwidth > 10 GHz, spectral range 800 … 1700 nm, SMA receptacle, SMA connector for the RF output. Not compatible with the optional filter holder.
Needs +12 VDC supply or bias battery.
|
| 10 | UPD-35-IR2-FR-F |
Ultrafast InGaAs Photodetector, rise time typ. 35 ps, bandwidth > 10 GHz, spectral range 800 … 1700 nm, FC/PC receptacle, SMA connector for the RF output. Not compatible with the optional filter holder.
Needs +12 VDC supply or bias battery.
|
| 11 | UPD-35-UVIR-FC-A |
Ultrafast InGaAs Photodetector, rise time typ. 35 ps, bandwidth typ. > 10 GHz, spectral range 350 … 1700 nm,
with SMF-28 fiber 1 m length, with FC/APC, SMA connector for the RF output. Needs +12 VDC supply or bias battery.
|
| 12 | UPD-35-IR2-FC |
Ultrafast InGaAs Photodetector, rise time typ. 35 ps, bandwidth typ. > 10 GHz, spectral range 800 … 1700 nm,
with SMF-28 fiber 1 m length, with FC/APC, SMA connector for the RF output. Not compatible with the optional filter holder.
Needs +12 VDC supply or bias battery.
|
| 13 | UPD-35-UVIR-FR-P |
Ultrafast InGaAs Photodetector, rise time typ. 35 ps, bandwidth typ. > 10 GHz, spectral range 350 … 1700 nm, with FC/PC fiber receptacle, SMA connector for the RF
output. Needs +12 VDC supply or bias battery.
|
| 14 | UPD-40-IR2-P |
Ultrafast InGaAs Photodetector, rise time typ. 40 ps, bandwidth > 8.5 GHz, spectral range 800 … 1700 nm,
polished glass window, SMA connector for the RF output. Needs +12 VDC supply or bias battery.
|
| 15 | UPD-40-IR2-D |
Ultrafast InGaAs Photodetector, rise time typ. 40 ps, bandwidth > 8.5 GHz, spectral range 800 … 1700 nm, crystal quartz diffuse window (recommended for high peak power lasers only), SMA connector for the RF output.
Needs +12 VDC supply or bias battery.
|
| 16 | UPD-40-UVIR-D |
Ultrafast InGaAs Photodetector, rise time typ. 40 ps, bandwidth > 8.5 GHz, spectral range 350 … 1700 nm, crystal quartz diffuse window (recommended for high peak power lasers only), SMA connector for the RF output.
Needs +12 VDC supply or bias battery.
|
| 17 | UPD-40-UVIR-P |
Ultrafast InGaAs Photodetector, rise time typ. 40 ps, bandwidth > 8.5 GHz, spectral range 350 … 1700 nm,
polished window MgF2, SMA connector for the RF output. Needs +12 VDC supply or bias battery.
|
| 18 | UPD-40-IR2-FR-S |
Ultrafast InGaAs Photodetector, rise time typ. 40 ps, bandwidth > 8.5 GHz, spectral range 800 … 1700 nm, SMA receptacle, SMA connector for the RF output. Not compatible with the optional filter holder.
Needs +12 VDC supply or bias battery.
|
| 19 | UPD-40-IR2-FR-F |
Ultrafast InGaAs Photodetector, rise time typ. 40 ps, bandwidth > 8.5 GHz, spectral range 800 … 1700 nm, FC/PC receptacle, SMA connector for the RF output. Not compatible with the optional filter holder.
Needs +12 VDC supply or bias battery.
|
| 20 | UPD-40-IR2-FC |
Ultrafast InGaAs Photodetector, rise time typ. 40 ps, bandwidth > 8.5 GHz, spectral range 800 … 1700 nm,
with 1 m long SMF-28 fiber, with FC/APC, SMA connector for the RF output. Not compatible with the optional filter holder. Needs +12 VDC supply or bias battery.
|
| 21 | UPD-50-SP |
Ultrafast Si Photodetector, rise time typ. 50 ps, bandwidth
> 7.0 GHz, spectral range 320 … 1100 nm, polished window, SMA connector for the RF output.
Needs +12 VDC supply or bias battery.
|
| 22 | UPD-50-SD |
Ultrafast Si Photodetector, rise time typ. 50 ps, bandwidth
> 7.0 GHz, spectral range 320 … 1100 nm, crystal quartz diffuse window (recommended for high peak power lasers only), SMA connector for the RF output.
Needs +12 VDC supply or bias battery.
|
| 23 | UPD-50-UD |
Ultrafast Si Photodetector, rise time typ. 50 ps, bandwidth
> 7.0 GHz, spectral range 170 … 1100 nm, crystal quartz diffuse window (recommended for high peak power lasers only), SMA connector for the RF output.
Needs +12 VDC supply or bias battery.
|
| 24 | UPD-50-UP |
Ultrafast Si Photodetector, rise time typ. 50 ps, bandwidth
> 7.0 GHz, spectral range 170 … 1100 nm, polished window MgF2, SMA connector for the RF output.
Needs +12 VDC supply or bias battery.
|
| 25 | UPD-50-SP-FR-F |
Ultrafast Si Photodetector, rise time typ. 50 ps, bandwidth
> 7.0 GHz, spectral range 320 … 1100 nm, polished window,
with fiber receptacle FC/PC, SMA connector for the RF output. Needs +12 VDC supply or bias battery.
|
| 26 |
UPD-50-UP
+
UPD-40-IR2-P
|
SPECIAL PACKAGE of TWO Ultrafast Photodetectors (Si and InGaAs), rise time typ. 40 ps, bandwidth > 8.5 GHz for UPD-40-IR2-P and rise time typ. 50 ps for UPD-50-UP, bandwidth typ. 7.0 GHz for UPD-50-UP. The combination covers the spectral range 170 … 1700 nm, polished windows, SMA connector for the RF output.
Needs +12 VDC supply or bias battery.
|
| 27 | UPD-70-IR2-P |
Ultrafast InGaAs Photodetector, rise time typ. 70 ps, bandwidth > 5.0 GHz, spectral range 800 … 1700 nm, polished window, SMA connector for the RF output.
Needs +12 VDC supply or bias battery.
|
| 28 | UPD-70-IR2-D |
Ultrafast InGaAs Photodetector, rise time typ. 70 ps, bandwidth > 5.0 GHz, spectral range 800 … 1700 nm, crystal quartz diffuse window (recommended for high peak power lasers only), SMA connector for the RF output.
Needs +12 VDC supply or bias battery.
|
| 29 | UPD-70-UVIR-D |
Ultrafast InGaAs Photodetector, rise time typ. 70 ps, bandwidth > 5.0 GHz, spectral range 350 … 1700 nm, crystal quartz diffuse window (recommended for high peak power lasers only), SMA connector for the RF output.
Needs +12 VDC supply or bias battery.
|
| 30 | UPD-70-UVIR-P |
Ultrafast InGaAs Photodetector, rise time typ. 70 ps, bandwidth > 5.0 GHz, spectral range 350 … 1700 nm, polished window MgF2, SMA connector for the RF output.
Needs +12 VDC supply or bias battery.
|
| 31 | UPD-70-IR2-FR-S |
Ultrafast InGaAs Photodetector, rise time typ. 70 ps, bandwidth > 5.0 GHz, spectral range 800 … 1700 nm, SMA receptacle, SMA connector for the RF output. Not compatible with the optional filter holder.
Needs +12 VDC supply or bias battery.
|
| 32 | UPD-70-IR2-FR-F |
Ultrafast InGaAs Photodetector, rise time typ. 70 ps, bandwidth > 5.0 GHz, spectral range 800 … 1700 nm, FC/PC receptacle, SMA connector for the RF output. Not compatible with the optional filter holder.
Needs +12 VDC supply or bias battery.
|
| 33 | UPD-70-IR2-FC |
Ultrafast InGaAs Photodetector, rise time typ. 70 ps, bandwidth > 5.0 GHz, spectral range 800 … 1700 nm,
with 1 m long SMF-28 fiber, with FC/APC, SMA connector for
the RF output. Not compatible with the optional filter holder. Needs +12 VDC supply or bias battery.
|
| 34 | UPD-100-IR1-P |
Ultrafast Ge-doped-Photodetector, rise time typ. 100 ps, bandwidth > 3.0 GHz, pulse width (FWHM) 300 ps,
spectral range 400 … 2000 nm, dark current typ. 700 nA, active area 80 μm diameter, polished window, SMA connector for the RF output, negative output.
Needs -12 VDC negative supply or bias battery.
|
| 35 | UPD-200-SP |
Ultrafast Si Photodetector, rise time typ. 175 ps, bandwidth typ. 2.0 GHz, spectral range 320 … 1100 nm, polished window, BNC connector for the RF output.
Needs +12 VDC supply or bias battery.
|
| 36 | UPD-200-SD |
Ultrafast Si Photodetector, rise time typ. 175 ps,
bandwidth typ. 2.0 GHz, spectral range 320 … 1100 nm, crystal quartz diffuse window (recommended for high peak power lasers only), BNC connector for the RF output.
Needs +12 VDC supply or bias battery.
|
| 37 | UPD-200-UD |
Ultrafast Si Photodetector, rise time typ. 175 ps,
bandwidth typ. 2.0 GHz, spectral range 170 … 1100 nm, crystal quartz diffuse window (recommended for high peak power lasers only), BNC connector for the RF output.
Needs +12 VDC supply or bias battery.
|
| 38 | UPD-200-UP |
Ultrafast Si Photodetector, rise time typ. 175 ps, bandwidth typ. 2.0 GHz, spectral range 170 … 1100 nm,
polished window MgF2, BNC connector for the RF output. Needs +12 VDC supply or bias battery.
|
| 39 | UPD-300-SP |
Ultrafast Si Photodetector, rise time typ. 300 ps, bandwidth typ. 1.0 GHz, spectral range 320 … 1100 nm, polished window, BNC connector for the RF output.
Needs +12 VDC supply or bias battery.
|
| 40 | UPD-300-SD |
Ultrafast Si Photodetector, rise time typ. 300 ps,
bandwidth > 1.0 GHz, spectral range 320 … 1100 nm, crystal quartz diffuse window (recommended for high peak power lasers only), BNC connector for the RF output.
Needs +12 VDC supply or bias battery.
|
| 41 | UPD-300-UD |
Ultrafast Si Photodetector, rise time typ. 300 ps,
bandwidth > 1.0 GHz, spectral range 170 … 1100 nm, crystal quartz diffuse window (recommended for high peak power lasers only), BNC connector for the RF output.
Needs +12 VDC supply or bias battery.
|
| 42 | UPD-300-UP |
Ultrafast Si Photodetector, rise time typ. 300 ps,
bandwidth > 1.0 GHz, spectral range 170 … 1100 nm, polished window MgF2, BNC connector.
Needs +12 VDC supply or bias battery.
|
| 43 | UPD-500-SP |
Ultrafast Si Photodetector, rise time typ. 500 ps,
bandwidth > 0.6 GHz, spectral range 320 … 1100 nm, polished window, BNC connector for the RF output.
Needs +12 VDC supply or bias battery.
|
| 44 | UPD-500-SD |
Ultrafast Si Photodetector, rise time typ. 500 ps,
bandwidth > 0.6 GHz, spectral range 320 … 1100 nm, crystal quartz diffuse window (recommended for high peak power lasers only), BNC connector for the RF output.
Needs +12 VDC supply or bias battery.
|
| 45 | UPD-500-UD |
Ultrafast Si Photodetector, rise time typ. 500 ps,
bandwidth > 0.6 GHz, spectral range 170 … 1100 nm, crystal quartz diffuse window (recommended for high peak power lasers only), BNC connector for the RF output.
Needs +12 VDC supply or bias battery.
|
| 46 | UPD-500-UP |
Ultrafast Si Photodetector, rise time typ. 500 ps,
bandwidth > 0.6 GHz, spectral range 170 … 1100 nm, polished window MgF2, BNC connector for the RF output.
Needs +12 VDC supply or bias battery.
|
| 47 | UPD-3N-IR2-P |
Exclusively from ALPHALAS! Greatly improved performance!
Ultrafast InGaAs PIN Photodetector, rise time typ. 150 ps, FWHM typ. 1 ns, bandwidth > 400 MHz,
spectral range 800 … 2100 nm, polished window, BNC connector for the RF output. Needs +5 VDC supply or bias battery.
|
| 48 | UPD-5N-IR2-P |
Exclusively from ALPHALAS! Greatly improved performance!
Ultrafast InGaAs PIN Photodetector, rise time typ. 200 ps, FWHM typ. 1 ns, bandwidth > 300 MHz,
spectral range 800 … 2600 nm, polished window, BNC connector for the RF output. Needs +5 VDC supply or bias battery.
|
| 49 | UPD-2M-IR2-P |
Ultrafast InGaAs PIN Photodetector, rise time typ. 75 ns, bandwidth > 250 MHz, spectral range 900 … 1700 nm, sensitive area 2 mm diameter, polished window, BNC
connector for the RF output. Needs +5 VDC supply or bias battery.
|
| 50 | UPD-2M-IR2-P-TEC |
Ultrafast InGaAs PIN Photodetector, rise time typ. 75 ns, bandwidth > 250 MHz, spectral range 900 … 2570 nm, sensitive area 0.3 mm diameter, polished window, BNC
connector for the RF output. One-stage TEC cooling to -10°C. TEC driver is included. Needs +5 VDC supply or bias battery.
|
| 51 | TERM-50-BNC |
External 50 Ohm terminating RF-load with a BNC connector and BNC-T-piece (recommended when UPD is used in
combination with any of the BBA amplifiers or oscilloscopes with 1 MOhm input impedance).
|
| 52 | TERM-50-SMA |
External 50 Ohm terminating RF-load with a SMA connector and SMA-T-piece (recommended when UPD is used in
combination with any of the BBA amplifiers or oscilloscopes with 1 MOhm input impedance).
|
| 53 | PS-UPD-12-WW | Low-Noise Power Supply for the UPD Photodetectors, universal input: 100 … 240 V AC (worldwide), output: 12 V DC. |
| 54 | PS-UPD-9-WW | Low-Noise Power Supply for the UPD Photodetectors, universal input: 100 … 240 V AC (worldwide), output: 9 V DC (matched to UPD-30-VSG-P photodiode). |
| 55 | PS-UPD-5-WW |
Low-Noise Power Supply for the UPD Photodetectors, universal input: 100 … 240 V AC (worldwide), output: 5 V DC (matched to UPD-15-IR2-FC, UPD-15-IR2-P, UPD-15-UVIR- FC, UPD-3N-IR2-P, UPD-2M-IR2-P and UPD-5N-IR2-P
photodiode).
|
| 56 | BAT-UPD-6V | Bias Battery for the UPD Photodetectors, 6 V. |
| 57 | BNC-UPD-1M | BNC(m) / BNC(m) cable 50 Ohm impedance, RG58, 1 m long. |
| 58 | SMA-UPD-1M | SMA(m) / SMA(m) cable 50 Ohm impedance, RG174, 1 m long. |
| 59 | SMA-BNC-AD | SMA(m) / BNC(f) adapter: SMA: male, BNC: female. Gold coated. |
| 60 | UPD-FH |
Filter holder for up-to 3 filters, each up-to 4.5 mm thickness, to be attached in front of the UPD photodiode (filters are NOT
included).
|
| Avalanche Si and InGaAs Photodiodes | ||
| 61 | UPD-350-SIA-SP |
Ultrafast Avalanche Si Photodiode, rise time typ. 350 ps, bandwidth > 1 GHz, spectral range 320 … 1100 nm, sensitive area 500 μm diameter (0.2 mm2),
quantum efficiency > 80 %, gain factor max. M=100, BNC connector for the RF output.
Needs power supply PS-UPD-AV.
|
| 62 | UPD-350-SIA-UP |
Ultrafast Avalanche Si Photodiode, UV-enhanced, rise time typ. 350 ps, bandwidth > 1 GHz, spectral range
200 … 1100 nm, sensitive area 500 μm diameter (0.2 mm2), quantum efficiency > 80 %, gain factor max. M=100,
MgF2 window, BNC connector for the RF output. Needs power supply PS-UPD-AV.
|
| 63 | UPD-350-SIA-UD |
Ultrafast Avalanche Si Photodiode, UV-enhanced, rise time: < 350 ps, bandwidth > 1 GHz, spectral range
200 … 1100 nm, sensitive area 500 μm diameter (0.2 mm2), quantum efficiency > 80 %, gain factor max. M=100, quartz diffuse window, BNC connector for the RF output.
Needs power supply PS-UPD-AV.
|
| 64 | UPD-250-IGA-SP |
Ultrafast Avalanche InGaAs Photodiode, rise time:
< 250 ps, bandwidth > 1.5 GHz, spectral range 800 … 1700 nm,
sensitive area 200 μm diameter (0.031 mm2), quantum efficiency
> 80 %, gain factor typ. M=20, BNC connector for the RF output.
Needs power supply PS-UPD-AV.
|
| 65 | UPD-500A-TIA |
Ultrafast Avalanche Si Photodiode with integrated transimpedance amplifier, rise time: < 500 ps, bandwidth > 1 GHz, spectral range 320 … 1100 nm,
sensitive area 500 μm diameter (0.2 mm2), quantum efficiency
> 80 %, transimpedance sensitivity: 110 kV/W, BNC connector for the RF output.
Needs power supply PS-UPD-AV.
|
| 66 | PS-UPD-AV |
Power Supply for the avalanche Photodetectors,
universal input: 100 … 240 V AC (worldwide), output matched to the avalanche photodiode.
|
| Balanced Photodetectors | ||
| 67 | Option: UPD-BAL | Balanced photodetector option for all listed above photodetectors. Two power supplies included. |
| 68 |
Option:
UPD-BAL-TIA
|
Amplified balanced photodetector option for all listed above photodetectors with transimpedance amplifier, 25x gain,
DC to 3 GHz
|
| 69 |
Option:
UPD-BAL-AMP
|
Amplified balanced photodetector option for all listed above photodetectors with broadband BBA amplifier of your choice (except BBA-100 and BBA-100-VG) |
| Photodetector Modules, Very High Gain | ||
| 70 | PDM-UVIR-720 |
Ultrafast Photodetector Module
Spectral range 185 … 720 nm, large sensitive areа: 8 mm
diameter, variable gain > 106, peak sensitivity @ 400 nm: 5.5 Megavolts/W, rise time typ. 500 ps with 50 Ohm load.
|
| 71 | PDM-UVIR-710 |
Ultrafast Photodetector Module
Spectral range 230 … 710 nm, large sensitive areа: 8 mm diameter, variable gain > 106, peak sensitivity @ 600 nm:
6.5 Megavolts/W, rise time typ. 500 ps with 50 Ohm load.
|
| 72 | PDM-UVIR-920 |
Ultrafast Photodetector Module
Spectral range 230 … 920 nm, large sensitive areа: 8 mm
diameter, variable gain > 106, peak sensitivity @ 600 nm: 4 Megavolts/W, rise time typ. 500 ps with 50 Ohm load.
|
| 73 | PDM-UVIR-710-P |
Ultrafast Photodetector Module for photon counting Spectral range 230 … 710 nm, large sensitive areа: 8 mm diameter, variable gain > 106, peak sensitivity @ 600 nm:
6.5 Megavolts/W, rise time typ. 500 ps with 50 Ohm load.
|
| 74 | PDM-UVIR-850-P |
Ultrafast Photodetector Module for photon counting
Spectral range 185 … 850 nm, large sensitive areа: 8 mm
diameter, variable gain > 106, peak sensitivity @ 600 nm: 4 Megavolts/W, rise time typ. 500 ps with 50 Ohm load.
|
| Broadband Pulse Amplifiers: BBA Series | ||
| 75 | BBA-3 |
Broadband Inverting Amplifier,
bandwidth 50 kHz to 14.5 GHz, gain 10 dB (> 3x amplitude), Gain flatness: +/-5 dB for f < 4 GHz;
rise time: typ. 22 ps, max. power out: +12 dBm (100 MHz),
+14 dBm (5 GHz), + 11 dBm (10 GHz)
Effective RMS input noise: 112 μV, maximum RF in: + 10 dBm, peak: 1 V, return loss (100 MHZ) S11 input: 15 dB,
S22 output: 18 dB, SMA-connectors, needs +12 VDC supply.
|
| 76 | BBA-20-10 |
Broadband AC-coupled Inverting Amplifier, bandwidth 100 kHz … 10 GHz,
Typical values: gain 20 dB (10x amplitude) @ 10 GHz,
gain 27 dB (22x amplitude) @ 5 GHz, Noise figure: 5 dB @ 5 GHz
Max. power out (IP3): +28 dBm (5 GHz), +22 dBm (10 GHz) SMA female connectors, needs +12 VDC supply.
|
| 77 | BBA-9-5 |
Broadband AC-coupled Inverting Amplifier, bandwidth 0.05 … 5 GHz, gain 19 dB @ 4 GHz (> 9x
amplitude), cascadable, SMA connectors, needs +5 VDC supply.
|
| 78 | BBA-10 |
Broadband AC-coupled Inverting Amplifier, bandwidth 0.01 … 3 GHz, gain 21 dB @ 1 GHz (> 10x
amplitude), SMA connectors, needs +9 VDC supply.
|
| 79 | BBA-15 |
Broadband AC-coupled Inverting Amplifier,
bandwidth 0.01 … 2 GHz, gain 24.5 dB (15x amplitude), needs
+9 VDC supply.
|
| 80 | BBA-10-4HP |
Broadband AC-coupled Inverting Amplifier, 0.01÷ 4 GHz, gain 19.4 dB (9x amplitude), SMA connectors (female),
needs +9 VDC supply.
|
| 81 | BBA-100 |
Broadband AC-coupled Non-Inverting Amplifier, bandwidth 0.01 … 2 GHz, rise time typ. 300 ps,
gain 43.5 dB (> 100x amplitude), SMA connectors (female), needs +9 VDC supply.
|
| 82 | BBA-100-VG |
Broadband AC-coupled Non-Inverting Amplifier, bandwidth 0.01 … 2 GHz, variable gain 0 … 43.5 dB (0 … >
100x amplitude), SMA connectors (female), needs +15 VDC supply.
|
| 83 | TERM-50-INT | Integrating a 50 Ohm terminating RF-load at the input of the any of the above amplifiers (recommended when used in combination with the UPD-series photodiodes). |
| 84 | BBA-2W-P |
Broadband High-Power Amplifier,
bandwidth 50 MHz … 1 GHz, gain 20 dB, peak output power: 4 W, average power: 2 W, BNC connectors, needs 24 V / 1 A supply (not included).
|
| 85 | PS-BBA-05-WW |
Low-Noise Power Supply for BBA Amplifiers,
universal input: 100 …240 V AC (worldwide), output +5 VDC.
|
| 86 | PS-BBA-09-WW |
Low-Noise Power Supply for BBA Amplifiers,
universal input: 100 … 240 V AC (worldwide), output +9 VDC.
|
| 87 | PS-BBA-15-WW | Low-Noise Power Supply for BBA-100-VG Amplifiers, universal input: 100 … 240 V AC (worldwide), output +15 VDC. |
| 88 | PS-BBA-12-WW |
Low-Noise Power Supply for BBA Amplifiers, universal input: 100 … 240 V AC (worldwide),
output +12 VDC / 1 A.
|
| 89 | PS-BBA-24-WW |
Low-Noise Power Supply for BBA Amplifiers,
universal input: 100 … 240 V AC (worldwide), output +24 VDC / 1 A.
|
| Infrared-To-Visible Converters: IR-VIS Series | ||
| 90 | IR-VIS-40-D |
Infrared-To-Visible Converter, for high-power Nd:YAG lasers, special ceramics, no bleaching. Needs no activation with UV light, active area 2x ? 38 mm (total 23 cm2), sensitivity
800 … 1100 nm and 1460 … 1600 nm, DOUBLE SIDED!
|
| Advanced Digital High-Speed High-Sensitivity CCD Line Cameras with USB 2.0 Interface CCD-S3600-D(-UV) | ||
| 91 | CCD-S3600-D |
Advanced digital high-speed CCD line camera, 3648 pixels with elongated pixel size (8x200 μm) for high sensitivity, spectral range 320 … 1100 nm, 16-bit ADC, large 32 MB of fast DDR2 onboard RAM, max. 269.5 fps, high-speed USB 2.0, plug & play, built-in TTL trigger input & output, USB-powered.
Includes drivers, libraries & applications for LabVIEW & C++. Supports Windows 11/10/8/7/Vista/XP, Linux, Mac OS X, etc.
Housing: 90 x 25 x 105 mm3 (W x H x D), including USB 2.0 signal & power supply cable for interfacing to a computer.
|
| 92 | CCD-S3600-D-UV |
Advanced digital high-speed CCD line camera, 3648 pixels with elongated pixel size (8x200 μm) for high sensitivity, UV to IR spectral range 200 … 1100 nm, 16-bit ADC, large 32 MB of fast DDR2 onboard RAM, max. 269.5 fps, high-speed USB 2.0, plug & play, built-in TTL trigger input & output, USB-powered. Includes drivers, libraries & applications for LabVIEW & C++.
Supports Windows 11/10/8/7/Vista/XP, Linux, Mac OS X, etc.
Housing: 90 x 25 x 105 mm3 (W x H x D) including USB 2.0 signal & power supply cable for interfacing to a computer.
|
| 93 | CCD-S3600-D-UV-E |
Advanced digital high-speed CCD line camera, 3648 pixels with elongated pixel size (8x200 μm) for high sensitivity, UV- enhanced, NO PROTECTING WINDOW, spectral range 170 … 1100 nm,
16-bit ADC, large 32 MB of fast DDR2 onboard RAM, max.
269.5 fps, high-speed USB 2.0, plug & play, built-in TTL trigger input & output, USB-powered. Includes drivers, libraries & applications for LabVIEW & C++. Supports Windows 11/10/8/7/Vista/XP, Linux, Mac OS X, etc.
Housing: 90 x 25 x 105 mm3 (W x H x D) including USB 2.0 signal & power supply cable for interfacing to a computer.
|
| 94 | CAB-TRIG-CCD-D |
Trigger cable for trigger input or trigger output for
CCD-3600-D(-UV), SMB connector on the CCD side, BNC on the other side, length 100 cm. ONLY for CCD-S3600-D(-UV)!
|
| High-Sensitivity Linear CCD Arrays with Analog Output CCD-2000M(-UV) | ||
| 95 | CCD-2000M |
CCD Array, 2048 pixels, elongated pixel size 14x200 μm for high sensitivity, spectral range 320 … 1100 nm, with analog
driver, OEM.
|
| 96 | CCD-2000M-V | CCD Array, 2048 pixels, UV-sensitive spectral range 250 … 1100 nm, elongated pixel size 14x200 μm for high sensitivity, with driver, OEM. |
| 97 | PS-CCD-EU | AC-DC Adapter for CCD-2000M(-UV) Array, input: 220 … 240 V AC (European standard), output: +7.5 VDC, stabilized, low noise. |
| 98 | PS-CCD-WW |
AC-DC Adapter for CCD-2000M(-UV) Array, universal input:
100 … 240 V AC (worldwide), output: +7.5 VDC, stabilized, low noise.
|
| 99 | CAB-SIG-CDM |
Signal Cable, connectors SMB to BNC, length 100 cm.
For CCD-2000M(-UV) ONLY!
|
| 100 | CAB-TRIG-CDM |
Trigger Cable, connectors SMB to BNC, length 100 cm.
For CCD-2000M(-UV) ONLY!
|
更多產品信息，請聯系蘇州leyu集團光電科技有限公司相關銷售人員獲取。
